Fun Vaping Facts & Things You Might Now Know
Here’s a quick post on some vaping facts! You might be surprised to have some of your unknown questions answered.
• DRY BURNING IS THE ABSOLUTE WORST THING YOU CAN DO TO YOUR EQUIPMENT!
• If you’re getting liquid into your mouth the chances are that your either adding too much liquid or your atomizer may not be operating properly.
• A Volt meter is the Best tool to use in vaping.
• Premium 510 Cartomizers both Hard and Soft tip take approximately 20 drops for a full fill.
• The only difference between Hard tip and Soft tip Cartomizers are the inserts at the top of the unit.
• If you want to change flavors when using the same Atomizer , without mixing them together. Try adding 2-3 drops of straight VG and vape it to clear out the previous flavor.
• Using a 3.5? Atomizer is the best combination for 6V.
• It can take approximately 6-10 hours to properly break-in an atomizer.
• Using 6 volts on an atomizer that is rated under 3.0? can reduce the atomizer’s run time.
• A 901 Atomizer, fits itself right in between a 510 and an 801 focusing on Actual feel (Throat hit) and Flavor.
• You can use a 510 or 901 cartridge on a KR-808D-1 or 510 Cartomizer.
• You also use a Drip tip on a Cartomizer.
• Depending on your liquid, 5-6 volts will either enhance or mutate your flavor.
• If you ever are experiencing a burning taste, check your device for any excess liquid or build-up. A dirty connection can cause a harsh taste.
• An 801 Atomizer is geared towards Flavor and Vapor production.
• Only Preform Atomizer maintenance if absolutely necessary.
• Using 5-6V is known to reduce the user’s cravings.
• A Volt meter can tell you if the Atomizer or Cartomizer is truly inoperable.
• There are many different ways to perform maintenance on an Atomizer or Cartomizer. If your ever stuck, try YouTube.
• Using a 1.5? will drastically reduce your battery’s run time.
• Air flow plays a key role in vapor production.
• A 510 atomizer is geared towards Actual feeling (Throat hit) and Vapor production. For Drippers:
– 901-510 Atomizer: Add 3-4 drops of liquid down the inner walls of the atomizer per vaping session.
– 801 Atomizer: Add 4-6 drops of liquid down the inner walls of the atomizer per vaping session.
• On the first fill of a new carto, let it soak in for 30 minutes before vaping.
• If you are a dripper and your atty leaks, you are either dripping too much or not vaping enough.
• Regardless of atomiser resistance, if you are getting burnt taste with liquid X at HV, use it a lower voltage.
• When standard attys quit performing at 3.7V, using it at 5V will rejuvenate it wonderfully.
• If you prefer cartos over atties, you have probably never tried atties from Ikenvape 🙂
• For drippers : liquid will often get “stuck” at the bottom of your drip tip . A quick LIGHT blow down the tube is the cure. 30. As an added safety, AW batteries are made of steel bodies.
• Taking long hits not allowing atty to cool. A 5 sec hit is more than enough with the proper liquid. Hit the button as your e-cig is on its way to your lips. Take a 2-3 sec drag, let go of the button and draw for 1-2 sec more. The atty is still producing while on its cool down. You will be amaze with the results.
• Liquid is Key when it comes to atomizer performance and longevity
